Setting Your Alarm via the Keypad

Step 1

Enter you user code or present your tag.

Present to tag to the left or right of the display

Setup 1a

If your alarm is set up to use multiple areas (e.g. night-time setting), you will need to make sure you set the correct zone. Here is the most common setting:

A: Every sensor on the system will be armed,
B: Only nighttime sensors will be armed.

Make sure the area you want to set is lit up red, then click YES.

Areas will be lit up red

Step 2

Wireless alarm

Your alarm will display Setting wireless devices and will then start counting down or ask you to Please leave via Exit Route.

Wireless alarm

Your alarm will then start counting down or ask you to Please leave via Exit Route.

Display showing: Please leave via Exit Route

Step 3

To let you know the system has been set, you will hear a short two-tone beep. This will have been shown to you during your system walkthrough.

The active areas will be lit up red.